On Home screen click on Menu

After that click on Settings

Than click on Connectivity icon

Click on VPN

Click on New

Click on PPTP VPN Tab

In following fields put your connection name(mobile3.supervpn.net) , VPN server address (eg. mobile3.supervpn.net) and your username and password. Leave encryption as it is than click on Save

After that tap on your created connection to connect

And thats it! You are now connected to your VPN account and connection on your Samsung Wave device with Bada 2.0 is now 100% secure and anonymous!

Enjoy in Super VPN Services!

asdasda

Click the “+” button on the network connections panel.

From the drop down menu select VPN followed by PPTP. Enter “pptp.supervpn.net” in the Service Name field for creating VPN account  then click Create. Please note that you can enter any friendly name you want for Service Name.

Now enter the Supervpn.net pptp server address (provided in your welcome email) in the Server Address field. For example pptp.supervpn.net . Then enter your VPN account username (provided in your welcome email) in the Account Name field. Then click the Authentication Settings button.

Enter your Password and click OK. (your SuperVPN account password is provided in your welcome email).

Click the Advanced button. Tick Send all traffic over VPN connection. After that click OK and click on Apply.

Leave the Show VPN status in menu bar box ticked and click to Connect.

Once you connect your all traffic is secured and you are 100% anonymous on Internet

Before setting up, you will need:

An android mobile phone with Firmware Version 1.6 or above (No need for root)

How to Set Up personalVPN-PPTP

1. Go to “Settings” on your mobile phone, and select “Wireless Controls”
2. Select “VPN settings”
3. Select “Add VPN”
4. Select “Add PPTP VPN”
5. Set a “VPN name” as you like (not necessarily to be SuperVPN), and Set VPN server as “mobile.supervpn.net“. Then save the setting.

How to use personalVPN-PPTP on your android phone

1. Go to “Settings” on your mobile phone, and select “Wireless Controls”
2. Select “VPN settings”
3. Connect to the VPN network you just set up
4. Key in your username and password, then click “Connect”
5. Once there is a small key-like icon on the left side of your notification bar, your phone is connected to the VPN.

For more questions please do not hesitate to contact us

1. Click On “Settings” Icon From Your iPhone

2. Click On “General” Tab

3. Click On “Network” Tab

4. Click On “VPN” Tab

5. Click On “Add VPN Configuration” Tab

6. Click On “PPTP” Tab

7. In “Description” field enter Supervpn

8. In “Server” field enter mobile.supervpn.net

9. In “Account” field enter account username you recived from us in your account activation email

10. Leave “RSA SecureID” OFF

11. In “Password” field enter your account password from your account activation email

12. In “Encryption Level” select NONE

13. In “Send All Traffic” put ON

14. Click on “Save” Tab to save your new vpn settings. You can find settings on this picture as well:

15. Now select Supervpn under “Choose a Configuration” menu

16. Under “VPN” tab turn vpn to “ON” and your VPN will be on and connected!

Best Regards,

Super VPN Support Staff

 a. PANTHER/TIGER USERS = Open your "Applications" folder.
    LEOPARD USERS = Open your "System Preferences."

 b. PANTHER/TIGER USERS = Find the “Internet Connect” icon and double-click on it.
    LEOPARD USERS = Click "Network" and then Click "VPN (PPTP)" icon on left.
    If no PPTP Account exists you will have to create one.
    CLICK on "+" and add a new VPN connection with Interface "VPN" and "VPN Type" PPTP

2. Create a New VPN Connection (PANTHER/TIGER ONLY. LEOPARD USERS SKIP THIS STEP)

 a. Go to the "File" menu and select “New VPN Connection.”

 b. In new window, Click "PPTP", then click "Continue."

3. Configure Client (LOCATIONS OF THE BUTTONS AND FIELDS VARY)

 a. Check box "Show VPN status in menu bar"

 b. PANTHER/TIGER USERS = Click on "Other" and select "Edit Configurations…"
    in pulldown menu.

    LEOPARD USERS =  Choose "Add Configuration" in "Configuration" pulldown menu.

 c. Enter the information as described below:

Description: “SuperVPN PPTP” (or whatever you wish)

Server Address: pptp.supervpn.net Account Name: “Your Super VPN username”

 EXAMPLE: stevejobs

Authentication Settings:

 a.Choose "Password"

 b. Enter your PPTP Password

Encryption Settings:

 "Maximum" (we use 128-bit)

Advanced Settings:

 Leave "Enable VPN on demand" UN-checked (tends to cause problems when checked)

 LEOPARD USERS MAKE SURE "Send all traffic over VPN connection"
 BOX IS CHECKED IF THAT IS YOUR DESIRED CONFIGURATION!!

4. Click the “OK” button.

That’s it! Your Super VPN PPTP connection is configured and ready for use.

You may close the window or Click "Connect" to test.

TO CONNECT THEREAFTER AND TO SWITCH SERVERS:

 1. Click your new VPN icon in your Mac's upper toolbar (If no icon, go back and check #3a.
    and check "Show VPN status in menu bar" box)

 2. Choose "Connect"

As you know we can provide you with free VPN accounts on our servers in USA and Germany for now and you don’t have any bandwidth limits.

All you need to do is when you spot our fresh post that Free VPN account is available, just be fast and follow link to contact us.

We will send you account details of your lifetime Free VPN account on your email which you put on our contact form so please check your email twice before you contact us.

Every day you have chance so do not be upset if you miss it first time.

Also you always have solution to write some post on blog, forum or website and put do-follow link to our website.

1. Download and install an OpenVPN client for MacOSX
2. Login to the Access Server’s Client Web Server and download the appropriate client config file (typically called “client.ovpn”)
3. Run the OpenVPN client with the downloaded client config file

A popular Super VPN client for MacOSX is Tunnelblick. It can be obtained for free from http://code.google.com/p/tunnelblick/. Follow these basic steps to use Tunnelblick with OpenVPN Access Server:

• Download the Tunnelblick_version.dmg file from http://code.google.com/p/tunnelblick/.
• Open the downloaded disk image file (which mounts the disk image).
• Drag the Tunnelblick icon (may be labelled “Tunnelblick.app”) to your Applications folder.
• After logging in to the Super VPN”s Client Web Server, download the client.ovpn file and place it in the ~/Library/Application Support/Tunnelblick/Configurations folder on the Mac.
• Run Tunnelblick by double-clicking its icon in the Applications folder.

The first time Tunnelblick is run on a given Mac, it will ask the user for the user’s password (on the Mac system). This is because Tunnelblick must have root privileges to run, as it modifies network settings as part of connecting to the VPN.

For more information on using Tunnelblick, see the Using Tunnelblick

[Show as slideshow]

The username/password are case sensitive and need to be entered exactly as in your account activation email.

The username/password are case sensitive and need to be entered exactly as in your account activation email.

That’s it! When you want to connect to SuperVPN PPTP service, just double–click on the connection and click the ‘Connect’ button. Enter your username and password (if you didn’t save it), and you’ll connect!